Insertion Type (Sharp tip) Thermocouple
(Series TY1)
Ordering Information
Configure this style to request a quote or call for assistance
Part No.:
select options
Start Here
| 1 Series |
2 Calibration |
3 Sheath Diameter |
4 5 Sheath Length |
6 Junction |
7 Handle Options |
8 Lead Wire Material |
9 Lead Wire Length |
10 Termination Style |
11 Special Features |
|---|---|---|---|---|---|---|---|---|---|
| TY1 |
| 2 | Calibration |
|---|---|
| J | Type J |
| K | Type K |
| T | Type T |
| E | Type E |
| 3 | Sheath Diameter |
|---|---|
| X | 0.165" |
| Z | 0.197" |
| Sizes for reference only (Standard tolerances apply) | |
| Contact factory for other diameters |
| 4 5 | Sheath Length |
|---|---|
| 1-6 |
| 6 | Junction |
|---|---|
| G | 
Grounded (standard) |
| U | 
Ungrounded |
| 7 | Handle Options |
|---|---|
| Q | 3/8” diameter X 3” Long |
| R | 1/2” diameter X 5” Long |
| Contact factory for other handle configurations |
| 8 | Lead Wire Material |
|---|---|
| A | 
Fiberglass (800°F) |
| B | 
Fluoropolymer (400°F) |
| C | 
Polyimide (500°F) |
| E | 
High temperature fiberglass (1200°F) |
| F | 
Fiberglass with stainless steel braid (800°F) (standard) |
| G | 
Fluoropolymer with stainless steel braid (400°F) |
| H | 
Fiberglass with armor cable (800°F) (standard) |
| J | 
Fluoropolymer with armor cable (400°F) |
| K | 
Polyimide with armor cable (500°F) |
| L | 
High temperature fiberglass with armor cable (1200°F) |
| M | 
Fiberglass with stainless steel braid with armor cable (800°F) |
| W | 
Fluoropolymer with stainless steel braid with armor cable (400°F) |
| Y | 
Fluoropolymer with stainless steel braid with Fluoropolymer outer jacket (400°F) |
| Wire gauge determined by ECS based on sheath diameter |
| 9 | Lead Wire Length |
|---|---|
| 6-999 | |
| Over 999" contact factory |
| 10 | Termination Style |
|---|---|
| A | 
2" stripped leads (bare ends) |
| B | 
2" stripped leads w/ spade lugs |
| C | 
Standard male plug (400°F) |
| D | 
High temp male plug (660°F) |
| E | 
Max temp male plug (800°F) |
| F | 
Ceramic male plug (1200°F) |
| G | 
Solid pin plug |
| H | 
Standard female jack (400°F) |
| J | 
Miniature plug (400°F) |
| K | 
Miniature jack (400°F) |
| L | 
2" stripped leads w/ #6 Ring terminals |
| W | 
2” stripped leads w/ pin terminals |
| Q | 
2” stripped leads w/ wire ferrules |
X |
Extra long lead wire length (beyond 2” stripped leads) |
| 11 | Special Features |
|---|---|
| None | |
| 07 | 
Cable Clamp |
| 09 | 
Mating connector |
| 18 | 
Moisture protection boot on connector |
| 21 | 
Fluoropolymer coated armor cable |
| 43 | 
Heat shrink strain relief on transition fitting (6”long) |
