Hose Clamp Thermocouples
(Series TG2)
Ordering Information
Configure this style to request a quote or call for assistance
Part No.:
select options
Start Here
| 1 Series |
2 Calibration |
3 Clamp Size |
4 Lead Wire Material |
5 Lead Wire Length |
6 Junction |
7 Termination Style |
8 Special Features |
|---|---|---|---|---|---|---|---|
| TG2 |
| 2 | Calibration |
|---|---|
| J | Type J |
| K | Type K |
| T | Type T |
| E | Type E |
| 3 | Clamp Size |
|---|---|
| Z00 | 7/32” to 5/8” 5/16” band width |
| Z01 | 7/16" to 25/32" 5/16" band width |
| Z02 | 1/2" to 29/32" 5/16" band width |
| Z03 | 11/16" to 1-1/4" 5/16" band width |
| Z04 | 15/16" to 1-1/2" 5/16" band width |
| Z05 | 1-7/16" to 2" 5/16" band width |
| Z06 | 1-11/16" to 2-1/4" 5/16" band width |
| Z07 | 1-15/16" to 2-1/2" 5/16" band width |
| Z08 | 9/16" to 1-1/16" 1/2 " band width |
| Z09 | 11/16" to 1-1/4" 1/2 " band width |
| Z10 | 13/16" to 1-3/4" 1/2 " band width |
| Z11 | 1-1/16" to 2" 1/2 " band width |
| Z12 | 1-9/16" to 2-1/2" 1/2 " band width |
| Z13 | 2-1/16" to 3" 1/2 " band width |
| Z14 | 2-5/16" to 3-1/4" 1/2 " band width |
| Z15 | 2-13/16" to 3-3/4" 1/2 " band width |
| Z16 | 3-1/16" to 4" 1/2 " band width |
| Z17 | 3-9/16" to 4-1/2" 1/2 " band width |
| Z18 | 1-7/8" to 5" 1/2 " band width |
| Z19 | 2-1/2" to 5-1/2" 1/2 " band width |
| Z20 | 3-1/8" to 6" 1/2 " band width |
| Z21 | 3-5/8" to 6-1/2" 1/2 " band width |
| Z22 | 4-1/8" to 7" 1/2 " band width |
| Z23 | 5-5/8" to 8-1/2" 9/16" band width |
| Z24 | 7-1/8" to 10" 9/16" band width |
| Z25 | 9-3/8" to 12-1/4" 9/16" band width |
| Check with factory for custom sizes |
| 4 | Lead Wire Material |
|---|---|
| A | 
Fiberglass (800°F) |
| B | 
Fluoropolymer (400°F) |
| C | 
Polyimide (500°F) |
| E | 
High temperature fiberglass (1200°F) |
| F | 
Fiberglass with stainless steel braid (800°F) (standard) |
| G | 
Fluoropolymer with stainless steel braid (400°F) |
| H | 
Fiberglass with armor cable (800°F) (standard) |
| J | 
Fluoropolymer with armor cable (400°F) |
| K | 
Polyimide with armor cable (500°F) |
| L | 
High temperature fiberglass with armor cable (1200°F) |
| M | 
Fiberglass with stainless steel braid with armor cable (800°F) |
| W | 
Fluoropolymer with stainless steel braid with armor cable (400°F) |
| Wire gauge determined by ECS based on sheath diameter |
| 5 | Lead Wire Length |
|---|---|
| 6-999 | |
| Over 999" contact factory |
| 6 | Junction |
|---|---|
| G | 
Grounded (standard) |
| U | 
Ungrounded |
| W | 
Grounded (Dual Junction) |
| Y | 
Ungrounded Common (Dual) |
| 7 | Termination Style |
|---|---|
| A | 
2" stripped leads (bare ends) |
| B | 
2" stripped leads w/ spade lugs |
| C | 
Standard male plug (400°F) |
| D | 
High temp male plug (660°F) |
| E | 
Max temp male plug (800°F) |
| G | 
Solid pin plug |
| H | 
Standard female jack (400°F) |
| J | 
Miniature plug (400°F) |
| K | 
Miniature jack (400°F) |
| L | 
2" stripped leads w/ #6 Ring terminals |
| N | 
Standard 3 pin plug w/ ground wire (400°F) |
| P | 
Dual molded male plug (400°F) |
| W | 
2” stripped leads w/ pin terminals |
| Q | 
2” stripped leads w/ wire ferrules |
X |
Extra long lead wire length (beyond 2” stripped leads) |
| 8 | Special Features |
|---|---|
| None | |
| 01 | 
Solid conductor (Lead wire) |
| 02 | 
1.5" long strain relief spring |
| 03 | 
1.5" long heat shrink where wire exits the probe |
| 06 | 
Epoxy seal |
| 07 | 
Cable Clamp |
| 08 | 
Bx Connector |
| 09 | 
Mating connector |
| 11 | 
International IEC 584-3 color coded leads |
| 12 | 
British color coded leads |
| 13 | 
German color coded leads |
| 14 | 
Japanese color coded leads |
| 15 | Reverse polarity color coded leads |
| 18 | 
Moisture protection boot on connector |
