Magnet Mount Thermocouples
(Series TJ1)
Ordering Information
Configure this style to request a quote or call for assistance
Part No.:
select options
Start Here
| 1 Series |
2 Calibration |
3 Magnet Type |
4 Bend Type |
5 Junction |
6 Lead Wire Material |
7 Lead Wire Length |
8 Termination Style |
9 Special Features |
|---|---|---|---|---|---|---|---|---|
| TJ1 | L |
| 2 | Calibration |
|---|---|
| J | Type J |
| K | Type K |
| T | Type T |
| E | Type E |
| 3 | Magnet Type |
|---|---|
| L | 25 LB pull |
| 4 | Bend Type |
|---|---|
| X | 
Straight (standard) |
| Y | 
90 Degree bend |
| Z | 
45 Degree bend |
| 5 | Junction |
|---|---|
| G | 
Grounded (standard) |
| U | 
Ungrounded |
| W | 
Grounded (Dual Junction) |
| Y | 
Ungrounded Common (Dual) |
| 6 | Lead Wire Material |
|---|---|
| A | 
Fiberglass (800°F) |
| B | 
Fluoropolymer (400°F) |
| C | 
Polyimide (500°F) |
| F | 
Fiberglass with stainless steel braid (800°F) (standard) |
| G | 
Fluoropolymer with stainless steel braid (400°F) |
| H | 
Fiberglass with armor cable (800°F) (standard) |
| J | 
Fluoropolymer with armor cable (400°F) |
| K | 
Polyimide with armor cable (500°F) |
| W | 
Fluoropolymer with stainless steel braid with armor cable (400°F) |
| Wire gauge determined by ECS based on sheath diameter |
| 7 | Lead Wire Length |
|---|---|
| 16-999 | |
| Over 999" contact factory |
| 8 | Termination Style |
|---|---|
| A | 
2" stripped leads (bare ends) |
| B | 
2" stripped leads w/ spade lugs |
| C | 
Standard male plug (400°F) |
| D | 
High temp male plug (660°F) |
| E | 
Max temp male plug (800°F) |
| G | 
Solid pin plug |
| H | 
Standard female jack (400°F) |
| J | 
Miniature plug (400°F) |
| N | 
Standard 3 pin plug w/ ground wire (400°F) |
| P | 
Dual molded male plug (400°F) |
| W | 
2” stripped leads w/ pin terminals |
| Q | 
2” stripped leads w/ wire ferrules |
X |
Extra long lead wire length (beyond 2” stripped leads) |
| 9 | Special Features |
|---|---|
| None | |
| 01 | 
Solid conductor (Lead wire) |
| 02 | 
1.5" long strain relief spring |
| 03 | 
1.5" long heat shrink where wire exits the probe |
| 06 | 
Epoxy seal |
| 07 | 
Cable Clamp |
| 08 | 
Bx Connector |
| 09 | 
Mating connector |
| 11 | 
International IEC 584-3 color coded leads |
| 12 | 
British color coded leads |
| 13 | 
German color coded leads |
| 14 | 
Japanese color coded leads |
| 15 | Reverse polarity color coded leads |
| 18 | 
Moisture protection boot on connector |
- 20 AWG stranded wire comes standard on magnetic thermocouples
- Standard magnet has 26 lb pull
- For other configurations contact factory
- Thermocouple is spring loaded and has a flat tip to ensure good surface measurement
