RTDs
Tube and Wire
Adjustable Bayonet Spring RTDsAdjustable Bayonet Spring
Adjustable Bayonet RTDs with Flexible Armor CableAdj Bayonet w/ Flex Armor
Fixed Depth Bayonet RTDsFixed Depth Bayonet
Head & Groove Bayonet RTDsHead & Groove Bayonet
Compression Type RTDsCompression Type
Rigid RTDs with ConnectorRigid w/ Connector
Mounting Flange RTDsMounting Flange
Ring Terminal RTDsRing Terminal Type
Spacer RTDsSpacer Type
Brass Bracket RTDsBrass Bracket Type
Mounting Bracket RTDs with 4mm ProbeMounting Bracket w/ 4mm Probe
Spade RTDsSpade Type
Threaded Bolt RTDsThreaded Bolt
Nozzle Clamp RTDsNozzle Clamp
Hose Clamp RTDsHose Clamp
Melt Bolt RTDsMelt Bolt
RTDs with Connection HeadRTD w/ Connection Head
Replacment RTD Elements with Attached FittingReplacment Element w/ Fitting
Sanitary CIP RTDs with Tri-clamp (16 AMP) capSanitary CIP w/ Tri-clamp (16 AMP) cap
Extension Cables for RTDsExtension Cable
Magnet Mount RTDsMagnet Mount
Insertion Type (Sharp tip) RTDsInsertion Type
Heat Trace RTDsHeat Trace Type
Bearing RTD SensorsBearing RTD Sensors
RTD with Loop Powered Housing with IndicatorRTD w/ Loop Powered Housing w/ Indicator
OEM Style
Bosch Style OEM Replacement RTDsBosch Style
Hayssen Style RTDHayssen Style
Mineral Insulated MGO
Mineral Insulated MGO RTDs w/ Lead WiresMI w/ Lead Wires
Heat Trace RTDs
Series RW1
Ordering Information
Part No.:
| 1 Series |
2 Element Type |
3 Element Accuracy |
4 Wire Configuration |
5 Sheath Diameter |
6 Sheath Length |
7 Head Mounting Fitting |
8 Connection Head Style |
|---|---|---|---|---|---|---|---|
| RW1 | X | 17 |
| 2 | Element Type |
|---|---|
| T | 100 Ω DIN 00385 (thin film) |
| U | 500 Ω DIN 00385 (thin film) |
| W | 1000 Ω DIN 00385 (thin film) |
| 3 | Element Accuracy |
|---|---|
| A | Class A (0.06%) |
| B | Class B (0.12%) |
| 4 | Wire Configuration |
|---|---|
| 2 | 
2-wire |
| 3 | 
3-wire |
| 4 | 
4-wire |
| 5 | Sheath Diameter |
|---|---|
| N | 0.250” (6.4mm) (1/4") |
| P | 0.314” (8mm) (5/16") |
| Sizes for reference only (Standard tolerances apply) | |
| For other diameters consult factory |
| 6 | Sheath Length |
|---|---|
| X | 3” X 4.25” (90°Bend) |
| For longer lengths consult factory |
| 7 | Head Mounting Fitting |
|---|---|
| 17 | 
1/2”npt single thread bushing (no process thread) |
| Fittings silver soldered (brazed) to sheath |
| 8 | Connection Head Style |
|---|---|
| A | 
Cast aluminum (standard) |
| B | 
Small cast aluminum |
| C | 
Flip top head cast aluminum |
| D | 
Cast steel |
| E | 
Stainless steel |
| F | 
Cast iron |
| G | 
Polypropylene |
| H | 
Explosion proof cast aluminum |
| Q | 
Explosion proof 316 Stainless steel |
| S | 
Mini aluminum screw down cover |
| W | 
Cast aluminum NEMA 4X IP68 rated |
| X | 
Explosion proof cast aluminum (BLUE) |