Cut to Length RTDs
(Series RB8)
Ordering Information
Configure this style to request a quote or call for assistance
Part No.:
select options
Start Here
| 1 Series |
2 Element Type |
3 Element Accuracy |
4 Wire Config |
5 Sheath Diameter |
6 Sheath Config |
7 8 Sheath Length |
9 Lead Wire Material |
10 Lead Wire Length |
11 Termination Style |
|---|---|---|---|---|---|---|---|---|---|
| RB8 | X | B | A |
| 2 | Element Type |
|---|---|
| T | 100 Ω DIN 00385 (thin film) |
| W | 1000 Ω DIN 00385 (thin film) |
| 3 | Element Accuracy |
|---|---|
| A | Class A (0.06%) |
| B | Class B (0.12%) |
| 4 | Wire Configuration |
|---|---|
| 2 | 
2-wire |
| 3 | 
3-wire |
| 4 | 
4-wire |
| 5 | Sheath Diameter |
|---|---|
| L | 0.188” (4.8mm) (3/16") |
| N | 0.250” (6.4mm) (1/4") |
| Sizes for reference only (Standard tolerances apply) | |
| For other diameters consult factory |
| 6 | Sheath Configuration |
|---|---|
| X | 
Straight (standard) |
| 7 8 | Sheath Length |
|---|---|
| 1-60 |
| 9 | Lead Wire Material |
|---|---|
| B | 
Fluoropolymer (400°F) |
| 10 | Lead Wire Length |
|---|---|
| 6-600 | |
| Over 600" contact factory |
| 11 | Termination Style |
|---|---|
| A | 
2" stripped leads (bare ends) |
- RTD element epoxied at tip of probe (Do not cut the first 2” of probe from the tip
- Tube can be cut to length using a tube cutter
- Maximum temperature is 400°F
