Hose Clamp RTDs
(Series RG2)
Ordering Information
Configure this style to request a quote or call for assistance
Part No.:
select options
Start Here
1 Series |
2 Element Type |
3 Element Accuracy |
4 Wire Configuration |
5 Lead Wire Material |
6 Lead Wire Length |
7 Clamp Size |
8 Termination Style |
9 Special Features |
---|---|---|---|---|---|---|---|---|
RG2 |
2 | Element Type |
---|---|
T | 100 Ω DIN 00385 (thin film) |
U | 500 Ω DIN 00385 (thin film) |
W | 1000 Ω DIN 00385 (thin film) |
X | 120 Ω Nickel DIN 00672 (thin film) |
Y | 100 Ω DIN 003916 (wire wound) |
Z | 500 Ω DIN 003916 (wire wound) |
Q | 10 Ω copper (thin film) |
S | 100 Ω DIN 00385 (wire wound) |
3 | Element Accuracy |
---|---|
A | Class A (0.06%) |
B | Class B (0.12%) |
4 | Wire Configuration |
---|---|
2 | 2-wire |
3 | 3-wire |
4 | 4-wire |
5 | 2-wire (Dual) |
5 | Lead Wire Material |
---|---|
A | Fiberglass (800°F) |
B | Fluoropolymer (400°F) |
C | Fiberglass with stainless steel braid (800°F) |
D | Fluoropolymer with stainless steel braid (400°F) |
E | Fiberglass with armor cable (800°F) |
F | Fluoropolymer with armor cable (400°F) |
6 | Lead Wire Length |
---|---|
6-999 | |
Over 999" contact factory |
7 | Clamp Size |
---|---|
Z00 | 7/32” to 5/8” 5/16” band width |
Z01 | 7/16" to 25/32" 5/16" band width |
Z02 | 1/2" to 29/32" 5/16" band width |
Z03 | 11/16" to 1-1/4" 5/16" band width |
Z04 | 15/16" to 1-1/2" 5/16" band width |
Z05 | 1-7/16" to 2" 5/16" band width |
Z06 | 1-11/16" to 2-1/4" 5/16" band width |
Z07 | 1-15/16" to 2-1/2" 5/16" band width |
Z08 | 9/16" to 1-1/16" 1/2 " band width |
Z09 | 11/16" to 1-1/4" 1/2 " band width |
Z10 | 13/16" to 1-3/4" 1/2 " band width |
Z11 | 1-1/16" to 2" 1/2 " band width |
Z12 | 1-9/16" to 2-1/2" 1/2 " band width |
Z13 | 2-1/16" to 3" 1/2 " band width |
Z14 | 2-5/16" to 3-1/4" 1/2 " band width |
Z15 | 2-13/16" to 3-3/4" 1/2 " band width |
Z16 | 3-1/16" to 4" 1/2 " band width |
Z17 | 3-9/16" to 4-1/2" 1/2 " band width |
Z18 | 1-7/8" to 5" 1/2 " band width |
Z19 | 2-1/2" to 5-1/2" 1/2 " band width |
Z20 | 3-1/8" to 6" 1/2 " band width |
Z21 | 3-5/8" to 6-1/2" 1/2 " band width |
Z22 | 4-1/8" to 7" 1/2 " band width |
Z23 | 5-5/8" to 8-1/2" 9/16" band width |
Z24 | 7-1/8" to 10" 9/16" band width |
Z25 | 9-3/8" to 12-1/4" 9/16" band width |
Check witht factory for custom sizes |
8 | Termination Style |
---|---|
A | 2" stripped leads (bare ends) |
B | 2" stripped w/ #8 spade lugs |
C | Standard male 2-pin plug (400°F) |
D | Standard male 3-pin plug (400°F) |
F | Standard 2-pin female jack (400°F) |
G | Standard 3-pin female jack (400°F) |
H | Miniature male 2-pin plug (400°F) |
P | Miniature male 3-pin plug (400°F) |
J | Miniature female 2-pin jack (400°F) |
K | Miniature female 3-pin jack (400°F) |
R | Dual molded male 4-pin plug (400°F) (for dual 2 wire) |
T | Dual molded female 4-hole jack (400°F) (for dual 2 wire) |
W | 2" stripped leads w/ pin terminals |
Q | 2" stripped leads w/ wire ferrules |
X |
Extra long lead wire length (beyond 2” stripped leads) |
9 | Special Features |
---|---|
None | |
02 | 1.5" long strain relief spring |
03 | 1.5" long heat shrink where wire exits the probe |
06 | Epoxy seal |
07 | Cable Clamp |
08 | Bx Connector |
09 | Mating connector |
- 24 AWG stranded wire comes standard on hose clamp type RTDs
- For other configurations contact factory