Spacer Thermocouples
(Series TC2)
Ordering Information
Configure this style to request a quote or call for assistance
Part No.:
select options
Start Here
| 1 Series |
2 Calibration |
3 Spacer Size |
4 Junction |
5 Lead Wire Material |
6 Lead Wire Length |
7 Termination Style |
8 Special Features |
|---|---|---|---|---|---|---|---|
| TC2 | X |
| 2 | Calibration |
|---|---|
| J | Type J |
| K | Type K |
| T | Type T |
| E | Type E |
| 3 | Spacer Size |
|---|---|
| X | 5.3mm ID x 10mm OD x 4mm thick |
| For other sizes consult factory |
| 4 | Junction |
|---|---|
| G | 
Grounded (standard) |
| U | 
Ungrounded |
| 5 | Lead Wire Material |
|---|---|
| A | 
Fiberglass (800°F) |
| B | 
Fluoropolymer (400°F) |
| C | 
Polyimide (500°F) |
| E | 
High temperature fiberglass (1200°F) |
| F | 
Fiberglass with stainless steel braid (800°F) (standard) |
| G | 
Fluoropolymer with stainless steel braid (400°F) |
| H | 
Fiberglass with armor cable (800°F) (standard) |
| J | 
Fluoropolymer with armor cable (400°F) |
| K | 
Polyimide with armor cable (500°F) |
| L | 
High temperature fiberglass with armor cable (1200°F) |
| M | 
Fiberglass with stainless steel braid with armor cable (800°F) |
| W | 
Fluoropolymer with stainless steel braid with armor cable (400°F) |
| Wire gauge determined by ECS based on sheath diameter |
| 6 | Lead Wire Length |
|---|---|
| 6-999 | |
| Over 999" contact factory |
| 7 | Termination Style |
|---|---|
| A | 
2" stripped leads (bare ends) |
| B | 
2" stripped leads w/ spade lugs |
| C | 
Standard male plug (400°F) |
| D | 
High temp male plug (660°F) |
| E | 
Max temp male plug (800°F) |
| G | 
Solid pin plug |
| H | 
Standard female jack (400°F) |
| J | 
Miniature plug (400°F) |
| K | 
Miniature jack (400°F) |
| L | 
2" stripped leads w/ #6 Ring terminals |
| N | 
Standard 3 pin plug w/ ground wire (400°F) |
| W | 
2” stripped leads w/ pin terminals |
| Q | 
2” stripped leads w/ wire ferrules |
X |
Extra long lead wire length (beyond 2” stripped leads) |
| 8 | Special Features |
|---|---|
| None | |
| 01 | 
Solid conductor (Lead wire) |
| 02 | 
1.5" long strain relief spring |
| 03 | 
1.5" long heat shrink where wire exits the probe |
| 06 | 
Epoxy seal |
| 07 | 
Cable Clamp |
| 08 | 
Bx Connector |
| 09 | 
Mating connector |
| 11 | 
International IEC 584-3 color coded leads |
| 12 | 
British color coded leads |
| 13 | 
German color coded leads |
| 14 | 
Japanese color coded leads |
| 15 | Reverse polarity color coded leads |
| 16 | 
French color coded leads |
| 18 | 
Moisture protection boot on connector |
- 20 AWG stranded wire comes standard on spacer type thermocouples
- Spacer is soldered to probe
- Grounded junction is most common
