Mullite Protection Tubes
(Series CPT2)
Ordering Information
Configure this style to request a quote or call for assistance
Part No.:
select options
Start Here
1 Series |
2 Protection Tube Size |
3 4 Sheath Length |
5 Attached Fitting |
6 Special Features |
---|---|---|---|---|
CPT2 |
2 | Protection Tube Size |
---|---|
A01 | 5mm x 7mm |
A02 | 1/4” x 3/8” |
A03 | 5/16” x 1/2” |
A04 | 3/8” x 1/2” |
A05 | 7/16” x 11/16” |
A06 | 1/2” x 3/4” |
A07 | 3/4” x 1” |
A08 | 1” x 1-1/4” |
A09 | 1-1/4” x 1-1/2” |
A10 | 5mm x 8mm |
A11 | 5/8” x 7/8” |
A12 | 3/16” x 1/4” |
A13 | 1-5/8” x 1-7/8” |
A14 | 3/16” x 5/16” |
A15 | 15mm x 10mm |
A16 | 1/8” x 3/16” |
A17 | 9/16” x 3/4” |
A18 | Hexoly |
A19 | 3/8” x 11/16” Halsic |
A20 | 5/16” x 5/8” Halsic |
3 4 | Sheath Length |
---|---|
12-60 |
5 | Attached Fitting (optional) |
---|---|
None | |
MF01 | Brass sleeve |
MF02 | 3/4” x 1” brass hex fitting |
MF03 | 1/2” x 3/4” hex fitting |
MF04 | Pipe Nipple |
MF05 | Ceramic collar |
MF06 | 1/2”-Hex-1/2” fitting |
MF07 | 3/4”- Hex-3/4” fitting |
MF08 | 1”- Hex –1” |
MF09 | Hex– 1/2” fitting |
MF10 | Hex– 3/4” fitting |
MF11 | 1-1/4” coupling |
MF12 | 1” coupling |
MF13 | 1-1/2” coupling |
MF14 | Hex-1” fitting |
MF15 | 3/4” x 1”Hex fitting |
MF16 | 3/4” x 1-1/14” fitting |
MF17 | 1” x 1-1/4” fitting |
MF18 | Alloy sleeve |
MF19 | 1/2” x 1” hex fitting |
For other configurations not shown contact factory |
6 | Special Features |
---|---|
None | |
B02 | Open both ends |
X | Special contact factory |