Moisture Resistant Adjustable Bayonet Spring Thermocouples
(Series TA5)
Ordering Information
Configure this style to request a quote or call for assistance
Part No.:
select options
Start Here
| 1 Series |
2 Cali- bration |
3 Sheath Diameter |
4 Sheath Length |
5 Junction |
6 Lead Wire Material |
7 Lead Wire Length |
8 Cap/Spring Style |
9 Epoxy Sealed Probe |
10 Termination Style |
11 Special Features |
|---|---|---|---|---|---|---|---|---|---|---|
| TA5 | J | L | S | X |
| 2 | Calibration |
|---|---|
| J | Type J |
| 3 | Sheath Diameter |
|---|---|
| L | 0.188" (4.8mm) (3/16") (standard) |
| 4 | Sheath Length |
|---|---|
| R | 1/4" |
| S | 3/8" (Standard) |
| W | 1/2" |
| X | 5/8" |
| Y | 3/4" |
| Z | 1" |
| H | 1.25" |
| P | 1.5" |
| Q | 1.75" |
| T | 2" |
| 5 | Junction |
|---|---|
| G | 
Grounded (standard) |
| U | 
Ungrounded |
| 6 | Lead Wire Material |
|---|---|
| S | 
Clear Fluoropolymer coated fiberglass w/ stainless steel braid |
| 7 | Lead Wire Length |
|---|---|
| 12-999 | |
| Over 999" contact factory |
| 8 | Cap/Spring Style |
|---|---|
| P | 7/16" ID single slot (standard cap)/1/4" OD x 10" spring |
| Q | 12.5mm ID double slot / 1/4"OD x 10" spring |
| R | 14.7 ID double slot / 1/4"OD x 10" spring |
| S | 7/16" ID single slot (standard cap)/1/4"OD x 6" spring |
| T | 12.5mm ID double slot / 1/4"OD x 6" spring |
| W | 14.7 ID double slot / 1/4"OD x 6" spring |
| 9 | Epoxy Sealed Probe |
|---|---|
| X | 500°F rated epoxy seal |
| 10 | Termination Style |
|---|---|
| A | 
2" stripped leads (bare ends) |
| B | 
2" stripped leads w/ spade lugs |
| C | 
Standard male plug (400°F) |
| G | 
Solid pin plug |
| H | 
Standard female jack (400°F) |
| J | 
Miniature plug (400°F) |
| K | 
Miniature jack (400°F) |
| L | 
2" stripped leads w/ #6 Ring terminals |
| W | 
2" stripped leads w/ wire ferrules (pin terminals) |
| Q | 
2” stripped leads w/ wire ferrules |
X |
Extra long lead wire length (beyond 2” stripped leads) |
| 11 | Special Features |
|---|---|
| None | |
| 04 | 
Flat tip probe |
| 05 | 
Drill point tip |
| 07 | 
Cable Clamp |
| 08 | 
Bx Connector |
| 09 | 
Mating connector |
| 11 | 
International IEC 584-3 color coded leads |
| 12 | 
British color coded leads |
| 13 | 
German color coded leads |
| 14 | 
Japanese color coded leads |
| 15 | Reverse polarity color coded leads |
| 16 | 
French color coded leads |
| 18 | 
Moisture protection boot on connector |
- Epoxy sealed probe & Fluoropolymer voated lead wire add moisture resistance
- Adjustable spring style thermocouples fit a wide variety of hole depths
- Cap spins over entire length of spring
- 20 awg standard wire
