Hot Runner Style Thermocouples w/ Round Washer
(Series THR2)
Ordering Information
Configure this style to request a quote or call for assistance
Part No.:
select options
Start Here
1 Series |
2 Thermocouple Style |
3 Calibration |
4 Sheath Diameter |
5 Sheath Material |
6 7 Sheath Length |
8 Junction |
9 10 Insertion Length |
11 Transition Fitting |
12 Lead Wire Material |
13 Lead Wire Length |
14 Termination Style |
---|---|---|---|---|---|---|---|---|---|---|---|
THR2 | H | 6 | C |
2 | Thermocouple Style |
---|---|
A | Style 1 |
B | Style 2 |
3 | Calibration |
---|---|
J | Type J |
K | Type K |
4 | Sheath Diameter |
---|---|
C | 0.059" (1.5mm) |
D | 0.062" (1.6mm)(1/16") |
Sizes for reference only (Standard tolerances apply) | |
For other diameters consult factory |
5 | Sheath Material |
---|---|
H | 316 SS |
6 7 | Sheath Length |
---|---|
1-24 |
8 | Junction |
---|---|
G | Grounded (Single) |
U | Ungrounded (Single) |
9 10 | Insertion Length |
---|---|
1-24 | |
X | No insertion (style 1 only) |
11 | Transition Fitting |
---|---|
6 | 3/16”OD X 1” (no spring) |
500°F epoxy standard |
12 | Lead Wire Material |
---|---|
C | Polyimide (500°F) |
Wire is 24 gauge stranded |
13 | Lead Wire Length |
---|---|
6-600 | |
Over 600" contact factory |
14 | Termination Style |
---|---|
A | 2" stripped leads (bare ends) |
B | 2" stripped leads w/ spade lugs |
C | Standard male plug (400°F) |
H | Standard female jack (400°F) |
J | Miniature plug (400°F) |
K | Miniature jack (400°F) |