Newbury Nozzle Style Thermocouples
(Series TNB)
Ordering Information
Configure this style to request a quote or call for assistance
Part No.:
select options
Start Here
| 1 Series |
2 Calibration |
3 Sheath Diameter |
4 Sheath Configuration/ Cap Size |
5 6 Insertion Length |
7 Junction |
8 Lead Wire Material |
9 Lead Wire Length |
10 Termination Style |
11 Special Features |
|---|---|---|---|---|---|---|---|---|---|
| TNB | J | H | Y | 001A | G | F | A | 02 |
| 2 | Calibration |
|---|---|
| J | Type J |
| 3 | Sheath Diameter |
|---|---|
| H | 0.125" (3.2mm) (1/8") |
| Sizes for reference only (Standard tolerances apply) |
| 4 | Sheath Configuration/Cap Size |
|---|---|
| Y | 90 Degree bend |
| 5 6 | Insertion Length |
|---|---|
| 1 |
| 7 | Junction |
|---|---|
| G | 
Grounded (standard) |
| 8 | Lead Wire Material |
|---|---|
| F | 
24 AWG Fiberglass with stainless steel braid (800°F) |
| 9 | Lead Wire Length |
|---|---|
| 12-999 | |
| Over 999" contact factory |
| 10 | Termination Style |
|---|---|
| A | 
2" stripped leads (bare ends) |
| 11 | Special Features |
|---|---|
| 02 | 
1.5" long strain relief spring |
Direct OEM replacement. Type J thermocouple is held in place with a set screw. 1/8” diameter probe with a 90 degree bend and strain relief spring.
