Mineral Insulated Thermocouples with Connection Head
(Series TN1)
Ordering Information
Configure this style to request a quote or call for assistance
Part No.:
select options
Start Here
1 Series |
2 Calibration |
3 Sheath Diameter |
4 Sheath Material |
5 6 Sheath Length |
7 Junction |
8 Head Mounting Fitting |
9 Connection Head Style |
10 Special Features |
11 Attached Fitting |
12 13 Insertion Length |
14 Trans Temp Range |
15 Temp Scale |
---|---|---|---|---|---|---|---|---|---|---|---|---|
TN1 |
2 | Calibration |
---|---|
J | Type J |
K | Type K |
T | Type T |
E | Type E |
W | Type J (Special limits) |
X | Type K (Special limits) |
Y | Type T (Special limits) |
Z | Type E (Special limits) |
3 | Sheath Diameter |
---|---|
H | 0.125" (3.2mm) (1/8") |
L | 0.188" (4.8mm) (3/16") |
M | 0.236" (6mm) |
N | 0.250" (6.4mm) (1/4") |
P | 0.314" (8mm) (5/16") |
Q | 0.375" (9.5mm) (3/8") |
4 | Sheath Material |
---|---|
F | 304 SS |
H | 316 SS |
M | INCONEL (600) |
N | 446 SS |
P | 310 SS |
Q | Hastelloy |
R | Pyrosil D |
5 6 | Sheath Length |
---|---|
¼-600 |
7 | Junction |
---|---|
G | Grounded (Single) |
U | Ungrounded (Single) |
E | Exposed (Single) |
R | Exposed & recessed (Single) |
W | Grounded (Dual) |
X | Ungrounded & isolated (Dual) |
Y | Ungrounded common (Dual) |
Z | Exposed & isolated (Dual) |
Ungrounded and isolated only available in 0.156" OD & larger |
8 | Head Mounting Fitting |
---|---|
06 | 1/2” npt x 1/2" npt double thread |
07 | 1/2” npt double thread spring loaded |
08 | 1/2” npt x 1/2" npt double threadspring loaded w/ oil seal |
09 | 1/2” npt x 3/4" npt double thread |
10 | 3/4” npt x 3/4" npt double thread |
12 | Single threaded brass compression (no process thread) |
13 | Single threaded stainless compression (no process thread) |
14 | 1/2” npt x 1" npt double thread |
15 | 1/2” npt x 1/4" npt double thread |
16 | 1/4” npt x 1/4" npt double thread |
17 | 1/2”npt single thread bushing (no process thread) |
18 | 1/4”npt single thread bushing (no process thread) |
For other fittings not shown contact factory |
9 | Connection Head Style |
---|---|
A | Cast aluminum (standard) |
B | Small cast aluminum |
C | Flip top head cast aluminum |
D | Cast steel |
E | Stainless steel |
F | Cast iron |
G | Polypropylene |
H | Explosion proof cast aluminum |
Q | Explosion proof 316 stainless steel |
R | Explosion proof cast aluminum DUAL conduit |
S | Mini aluminum screw down cover |
W | Cast aluminum NEMA 4X IP68 rated |
10 | Special Features |
---|---|
None | |
04 | Flat tip probe |
17 | 420 milliamp transmitter (hockey puck style) Non Isolated |
53 | 420 milliamp transmitter (hockey puck style) Isolated |
24 | Fluoropolymer covered probe |
28 | 90 degree bend |
30 | 45 degree bend |
11 | Attached Fitting (optional) |
---|---|
None | |
F01 | 1/8" npt single thread |
F02 | 1/4" npt single thread |
F03 | 3/8" npt single thread |
F04 | 1/2" npt single thread |
F05 | 3/4" npt single thread |
F06 | 1/2" npt x 1/2" npt double thread |
F07 | 1/2" npt double thread. Spring loaded |
F08 | 1/2" npt x 1/2" npt double thread. Spring loaded w/ oil seal |
F09 | 1/2" npt x 3/4" npt double thread |
F10 | 3/4" npt x 3/4" npt double thread |
F11 | Fixed bayonet cap assembly |
F15 | 1" npt single thread |
F16 | Adjustable 7/16" ID bayonet cap fitting (1/8" OD & 3mm OD) |
F17 | Adjustable 12.5mm ID double slot bayonet cap fitting (1/8" OD & 3mm OD) |
F18 | 1/8" npt compression fitting (Brass) |
F19 | 1/8" npt compression fitting (Stainless Steel) |
F20 | 1/4" npt compression fitting (Brass) |
F21 | 1/4" npt compression fitting (Stainless Steel) |
F28 | 1" circular mounting flange |
For other fittings not shown contact factory |
12 13 | Insertion Length (when required) |
---|---|
None | |
1-144 |
For Transmitter Only (Optional)
14 | Transmitter Temperature Range |
---|---|
None | |
1-1200 |
15 | Transmitter Temperature Scale |
---|---|
None | |
F | Farenheit |
C | Celsius |
- 420 milliamp transmitter requires an ungrounded (single) junction