RTDs with Connection Head
(Series RK1)
Ordering Information
Configure this style to request a quote or call for assistance
Part No.:
select options
Start Here
1 Series |
2 Element Type |
3 Element Accuracy |
4 Wire Config |
5 Sheath Diameter |
6 7 Sheath Length |
8 Head Mounting Fitting |
9 Connection Head Style |
10 Special Features |
11 Attached Fitting |
12 13 Insertion Length |
14 Trans Temp Range |
15 Temp Scale |
---|---|---|---|---|---|---|---|---|---|---|---|---|
RK1 |
2 | Element Type |
---|---|
T | 100 Ω DIN 00385 (thin film) |
U | 500 Ω DIN 00385 (thin film) |
W | 1000 Ω DIN 00385 (thin film) |
X | 120 Ω Nickel DIN 00672 (thin film) |
Y | 100 Ω DIN 003916 (wire wound) |
Z | 500 Ω DIN 003916 (wire wound) |
Q | 10 Ω copper (thin film) |
S | 100 Ω DIN 00385 (wire wound) |
3 | Element Accuracy |
---|---|
A | Class A (0.06%) |
B | Class B (0.12%) |
4 | Wire Configuration |
---|---|
2 | 2-wire |
3 | 3-wire |
4 | 4-wire |
5 | 2-wire (Dual) |
6 | 3-wire (Dual) |
5 | Sheath Diameter |
---|---|
H | 0.125” (3.2mm) (1/8") |
J | 0.156” (4mm) |
L | 0.188” (4.8mm) (3/16") |
M | 0.236” (6mm) |
N | 0.250” (6.4mm) (1/4") |
P | 0.314” (8mm) (5/16") |
Q | 0.375” (9.5mm) (3/8") |
Sizes for reference only (Standard tolerances apply) | |
For other diameters consult factory |
6 7 | Sheath Length |
---|---|
2-60 |
8 | Head Mounting Fitting |
---|---|
06 | 1/2” npt x 1/2" npt double thread |
07 | 1/2” npt double thread spring loaded |
08 | 1/2” npt x 1/2" npt double threadspring loaded w/ oil seal |
09 | 1/2” npt x 3/4" npt double thread |
10 | 3/4” npt x 3/4" npt double thread |
12 | Single threaded brass compression (no process thread) |
13 | Single threaded stainless compression (no process thread) |
14 | 1/2” npt x 1" npt double thread |
15 | 1/2” npt x 1/4" npt double thread |
16 | 1/4” npt x 1/4" npt double thread |
17 | 1/2”npt single thread bushing (no process thread) |
18 | 1/4”npt single thread bushing (no process thread) |
Fittings silver soldered (brazed) to sheath | |
For other fittings not shown contact factory |
9 | Connection Head Style |
---|---|
A | Cast aluminum (standard) |
B | Small cast aluminum |
C | Flip top head cast aluminum |
D | Cast steel |
E | Stainless steel |
F | Cast iron |
G | Polypropylene |
H | Explosion proof cast aluminum |
Q | Explosion proof 316 Stainless steel |
R | Explosion proof cast aluminum DUAL conduit |
S | Mini aluminum screw down cover |
W | Cast aluminum NEMA 4X IP68 rated |
10 | Special Features |
---|---|
None | |
04 | Flat tip probe |
17 | 420 milliamp transmitter (hockey puck style) Non Isolated |
53 | 420 milliamp transmitter (hockey puck style) Isolated |
24 | Fluoropolymer covered probe |
28 | 90 degree bend |
30 | 45 degree bend |
11 | Attached Fitting (optional) |
---|---|
None | |
F01 | 1/8" npt single thread |
F02 | 1/4" npt single thread |
F03 | 3/8" npt single thread |
F04 | 1/2" npt single thread |
F05 | 3/4" npt single thread |
F06 | 1/2" npt x 1/2" npt double thread |
F07 | 1/2" npt double thread. Spring loaded |
F08 | 1/2" npt x 1/2" npt double thread. Spring loaded w/ oil seal |
F09 | 1/2" npt x 3/4" npt double thread |
F10 | 3/4" npt x 3/4" npt double thread |
F11 | Fixed bayonet cap assembly |
F15 | 1" npt single thread |
F16 | Adjustable 7/16" ID bayonet cap fitting (1/8" OD & 3mm OD) |
F17 | Adjustable 12.5mm ID double slot bayonet cap fitting (1/8" OD & 3mm OD) |
F18 | 1/8" npt compression fitting (Brass) |
F19 | 1/8" npt compression fitting (Stainless Steel) |
F20 | 1/4" npt compression fitting (Brass) |
F21 | 1/4" npt compression fitting (Stainless Steel) |
For other fittings not shown contact factory |
12 13 | Insertion Length (when required) |
---|---|
None | |
0-60 |
For Transmitter Only (Optional)
14 | Transmitter Temperature Range |
---|---|
None | |
1-1200 |
15 | Transmitter Temperature Scale |
---|---|
None | |
F | Farenheit |
C | Celsius |