RTD with Loop Powered Housing with Indicator
(Series RT1)
Ordering Information
Configure this style to request a quote or call for assistance
Part No.:
select options
Start Here
1 Series |
2 Element Type |
3 Element Accuracy |
4 Wire Config |
5 Sheath Diameter |
6 7 Sheath Length |
8 Connection Head Style |
9 Head Mounting Fitting |
10 Special Features |
11 Trans Temp Range |
12 Temp Scale |
---|---|---|---|---|---|---|---|---|---|---|
RT1 |
2 | Element Type |
---|---|
T | 100 Ω DIN 00385 (thin film) |
W | 1000 Ω DIN 00385 (thin film) |
3 | Element Accuracy |
---|---|
A | Class A (0.06%) |
B | Class B (0.12%) |
4 | Wire Configuration |
---|---|
2 | 2-wire |
3 | 3-wire |
4 | 4-wire |
5 | Sheath Diameter |
---|---|
L | 0.188” (4.8mm) (3/16") |
M | 0.236” (6mm) |
N | 0.250” (6.4mm) (1/4") |
P | 0.314” (8mm) (5/16") |
Sizes for reference only (Standard tolerances apply) | |
For other diameters consult factory |
6 7 | Sheath Length |
---|---|
1-12 |
8 | Connection Head Style |
---|---|
Z | Loop Powered Heavy-duty LCD Field Indicator |
P | Loop Powered LCD In-head mounting |
9 | Head Mounting Fitting |
---|---|
06 | 1/2” npt x 1/2" npt double thread |
07 | 1/2” npt double thread spring loaded |
09 | 1/2” npt x 3/4" npt double thread |
14 | 1/2” npt x 1" npt double thread |
15 | 1/2” npt x 1/4" npt double thread |
17 | 1/2”npt single thread bushing (no process thread) |
Fittings silver soldered (brazed) to sheath | |
For other fittings not shown contact factory |
10 | Special Features |
---|---|
None | |
17 | 420 milliamp transmitter (hockey puck style) Non Isolated |
22 | HART® – compatible 4/20 milliamp transmitter |
46 | High accuracy 4/20 Milliamp transmitter hockey puck style) |
53 | 420 milliamp transmitter (hockey puck style) Isolated |
HART® is a registered trademark of HART® Communication Foundation
For Transmitter Only (Optional)
14 | Transmitter Temperature Range |
---|---|
None | |
1-1200 |
15 | Transmitter Temperature Scale |
---|---|
None | |
F | Farenheit |
C | Celsius |