Sanitary CIP RTDs with Tri-clamp (16 AMP) cap
(Series RN1)
Ordering Information
Configure this style to request a quote or call for assistance
Part No.:
select options
Start Here
1 Series |
2 Element Type |
3 Element Accuracy |
4 Wire Config |
5 Sheath Diameter |
6 7 Sheath Length |
8 Connection Head Style |
9 Sanitary Cap Size |
10 Special Features |
11 Trans Temp Range |
12 Temp Scale |
---|---|---|---|---|---|---|---|---|---|---|
RN1 | N |
2 | Element Type |
---|---|
T | 100 Ω DIN 00385 (thin film) |
U | 500 Ω DIN 00385 (thin film) |
W | 1000 Ω DIN 00385 (thin film) |
X | 120 Ω Nickel DIN 00672 (thin film) |
Y | 100 Ω DIN 003916 (wire wound) |
Z | 500 Ω DIN 003916 (wire wound) |
S | 100 Ω DIN 00385 (wire wound) |
3 | Element Accuracy |
---|---|
A | Class A (0.06%) |
B | Class B (0.12%) |
4 | Wire Configuration |
---|---|
2 | 2-wire |
3 | 3-wire |
4 | 4-wire |
5 | 2-wire (Dual) |
6 | 3-wire (Dual) |
5 | Sheath Diameter |
---|---|
N | 0.250” (6.4mm) (1/4") |
Sizes for reference only (Standard tolerances apply) | |
For other diameters consult factory |
6 7 | Sheath Length |
---|---|
1-12 |
8 | Connection Head Style |
---|---|
E | Stainless steel |
G | Polypropylene |
H | Explosion proof cast aluminum |
Q | Explosion proof 316 Stainless steel |
9 | Sanitary Cap Size (CIP sanitary) |
---|---|
X01 | 1/2” (for 0.5” or 0.75” tube size ) |
X02 | 1.5” (for 1” or 1.5” tube size ) |
X03 | 2” (for 2” tube size) |
X04 | 2.5” (for 2.5” tube size) |
X05 | 3” (for 3” tube size) |
X06 | 4” (for 4” tube size) |
10 | Special Features |
---|---|
None | |
17 | 420 milliamp transmitter (hockey puck style) Non Isolated |
22 | HART® – compatible 4/20 milliamp transmitter |
53 | 420 milliamp transmitter (hockey puck style) Isolated |
HART® is a registered trademark of HART® Communication Foundation
For Transmitter Only (Optional)
14 | Transmitter Temperature Range |
---|---|
None | |
1-1200 |
15 | Transmitter Temperature Scale |
---|---|
None | |
F | Farenheit |
C | Celsius |