Polyimide Adhesive Thermocouple
(Series TE2)
Ordering Information
Configure this style to request a quote or call for assistance
Part No.:
select options
Start Here
| 1 Series |
2 Calibration |
3 Polyimide Patch Style |
4 Wire Gauge |
5 Lead Wire Material |
6 Lead Wire Length |
7 Termination Style |
8 Special Features |
|---|---|---|---|---|---|---|---|
| TE2 |
| 2 | Calibration |
|---|---|
| J | Type J |
| K | Type K |
| T | Type T |
| E | Type E |
| 3 | Polyimide Patch Style |
|---|---|
| F | 
1” x 1” |
| H | 
1.5” x 1” |
| M | 
1” Circle |
| For other sizes consult factory |
| 4 | Wire Gauge |
|---|---|
| 3 | 30 AWG (Fluoropolymer ONLY) |
| 1 | 24 AWG |
| 5 | Lead Wire Material |
|---|---|
| B | 
Fluoropolymer (400°F) |
| C | 
Polyimide (500°F) |
| I | 
Fluoropolymer Singles |
| 6 | Lead Wire Length |
|---|---|
| 6-600 | |
| Over 600" contact factory |
| 7 | Termination Style |
|---|---|
| A | 
2" stripped leads (bare ends) |
| B | 
2" stripped leads w/ spade lugs |
| C | 
Standard male plug (400°F) |
| G | 
Solid pin plug |
| H | 
Standard female jack (400°F) |
| J | 
Miniature plug (400°F) |
| K | 
Miniature jack (400°F) |
| 8 | Special Features |
|---|---|
| None | |
| 01 | 
Solid conductor (Lead wire) |
| 07 | 
Cable Clamp |
| 09 | 
Mating connector |
| 42 | 
Rubber strain relief for mini plug |
- Stranded wire comes standard (use special feature code “01” for solid conductor)
- Silicone adhesive leaves no residue behind
