Alumina Protection Tubes
(Series CPT1)
Ordering Information
Configure this style to request a quote or call for assistance
Part No.:
select options
Start Here
| 1 Series |
2 Protection Tube Size |
3 4 Sheath Length |
5 Attached Fitting |
6 Special Features |
|---|---|---|---|---|
| CPT1 |
| 2 | Protection Tube Size |
|---|---|
| A01 | 5mm x 7mm |
| A02 | 1/4” x 3/8” |
| A03 | 5/16” x 1/2” |
| A04 | 3/8” x 1/2” |
| A05 | 7/16” x 11/16” |
| A06 | 1/2” x 3/4” |
| A07 | 3/4” x 1” |
| A08 | 1” x 1-1/4” |
| A09 | 1-1/4” x 1-1/2” |
| A10 | 5mm x 8mm |
| A11 | 5/8” x 7/8” |
| A12 | 3/16” x 1/4” |
| A13 | 1-5/8” x 1-7/8” |
| A14 | 3/16” x 5/16” |
| A15 | 15mm x 10mm |
| A16 | 1/8” x 3/16” |
| A17 | 9/16” x 3/4” |
| A18 | Hexoly |
| A19 | 3/8” x 11/16” Halsic |
| A20 | 5/16” x 5/8” Halsic |
| 3 4 | Sheath Length |
|---|---|
| 12-60 |
| 5 | Attached Fitting (optional) |
|---|---|
| None | |
| MF01 | Brass sleeve |
| MF02 | 3/4” x 1” brass hex fitting |
| MF03 | 1/2” x 3/4” hex fitting |
| MF04 | Pipe Nipple |
| MF05 | Ceramic collar |
| MF06 | 1/2”-Hex-1/2” fitting |
| MF07 | 3/4”- Hex-3/4” fitting |
| MF08 | 1”- Hex –1” |
| MF09 | Hex– 1/2” fitting |
| MF10 | Hex– 3/4” fitting |
| MF11 | 1-1/4” coupling |
| MF12 | 1” coupling |
| MF13 | 1-1/2” coupling |
| MF14 | Hex-1” fitting |
| MF15 | 3/4” x 1”Hex fitting |
| MF16 | 3/4” x 1-1/14” fitting |
| MF17 | 1” x 1-1/4” fitting |
| MF18 | Alloy sleeve |
| MF19 | 1/2” x 1” hex fitting |
| For other configurations not shown contact factory |
| 6 | Special Features |
|---|---|
| None | |
| B02 | Open both ends |
| X | Special contact factory |
