Base Metal Thermocouples with Protection Tube & 90 Degree Elbow
(Series TX3)
Ordering Information
Configure this style to request a quote or call for assistance
Part No.:
select options
Start Here
| 1 Series |
2 Calibration |
3 Wire Gauge |
4 Protection Tube Material |
5 Protection Tube Size |
6 7 Hot Leg Length |
8 Junction/Weld Type |
9 Connection Head Style |
10 11 Cold Leg Length |
12 Special Features |
13 Attached Fitting |
14 15 Insertion Length |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TX3 |
| 2 | Calibration |
|---|---|
| J | Type J |
| K | Type K |
| T | Type T |
| E | Type E |
| N | Type N |
| 3 | Wire Gauge |
|---|---|
| A | 8 gauge |
| C | 14 gauge |
| E | 20 gauge |
| 4 | Protection Tube Material |
|---|---|
| 15 | 446 SS |
| 16 | Pure Nickel |
| 17 | Inconel |
| 18 | 304 stainless steel |
| 19 | 310 stainless steel |
| 20 | 316 stainless steel |
| 21 | Silicon Carbide |
| 22 | Mullite |
| 23 | Alumina |
| 24 | Metal Ceramic |
| 25 | Carbon Steel |
| 26 | Tercod |
| 27 | Cast Alloy |
| 28 | Cast Iron with Tap |
| 29 | 330 stainless steel |
| 30 | Hexaloy |
| 31 | Cast-T |
| 32 | Refractory Coated |
| 33 | Incoloy 800 |
| 34 | Hastelloy C 276 |
| Cold Leg supplied in carbon steel as a standard |
| 5 | Protection Tube Size |
|---|---|
| A | 1/4”NPT |
| B | 1/2”NPT |
| C | 3/4”NPT |
| D | 1”NPT |
| E | 1-3/4”OD |
| F | 3/8”OD |
| G | 11/16”OD |
| H | 3/4”OD |
| J | 7/8”OD |
| K | 1”OD |
| L | 1/8”NPT |
| M | 3/8”NPT |
| N | 1/2”OD |
| P | 7MM OD |
| R | 1/4”OD |
| 6 7 | Hot Leg Length |
|---|---|
| 2-60 |
| 8 | Junction/Weld Type |
|---|---|
| M | 
Butt weld |
| N |
Twisted weld |
| S |
Dual Junction - Butt weld |
| 9 | Connection Head Style |
|---|---|
| A | 
Cast aluminum (standard) |
| B | 
Small cast aluminum |
| C | 
Flip top head cast aluminum |
| D | 
Cast steel |
| E | 
Stainless steel |
| F | 
Cast iron |
| G | 
Polypropylene |
| H | 
Explosion proof cast aluminum |
| 10 11 | Cold Leg Length |
|---|---|
| 2-60 |
| 12 | Special Features |
|---|---|
| None | |
| B01 | Ajax Bend |
| B02 | Open both ends |
| B03 | Lot Certification |
| B05 | Individual Certification |
| B06 | Schedule 80 |
| B07 | Dual/Lot cert. |
| B08 | Butt weld/Lot cert. |
| B09 | Dual Butt weld/lot cert. |
| X | Special contact factory |
| 13 | Attached Fitting or Hardware (optional) |
|---|---|
| None | |
| A | Adjustable Flange |
| B | 1/2”NPT Stainless Steel |
| C | 3/4”NPT Stainless Steel |
| D | 1”NPT Stainless Steel |
| E | 1-1/4”NPT Stainless Steel |
| F | 1-1/2”NPT Stainless Steel |
| G | 1/2”NPT Steel |
| H | 3/4”NPT Steel |
| J | 1”NPT Steel |
| K | 1-1/4”NPT Steel |
| L | 1-1/2”NPT Steel |
| M | Tapered Plug |
| P | Hot Junction Cup |
| For other fittings not shown contact factory |
| 14 15 | Insertion Length (when required) |
|---|---|
| None | |
| 1-59 |
